Traditional Well Pump Systems

By far the most common private well pump system is the traditional model which utilizes a standard 3450 RPM motor and a storage reservoir (pressure tank).  This system typically cycles between approximately 40 psi and 60 psi  and relies on the tank to supply water until the system pressure drops to the start up pressure (approximately 40 psi).  The technology for this type of system has been utilized for well over 50 years, and this is the system that has been installed in the majority of residences.

Guthrie & Frey, Inc. is able to answer most questions over the phone, and it is likely that we have serviced your system in the past, even before you may have owned the property.  We may have information about your installation in our database of over 40,000 customers.  Please click here to contact Guthrie & Frey, Inc. if you have a question, or if you need prompt service.